A liburnian or liburna was a type of small galley used for raiding and patrols, particularly by the Roman navy.
According to some thoughts, liburnian was shown in the scene of naval battle, curved on a stone tablet (Stele di Novilara) found near Antique Pisaurum (Pesaro), outlined to 5th or 6th century BC, the most possibly showing imaginary battle between Liburnian and Picenian fleets. The liburnian was presented as light type of the ship with one row or the oars, one mast, one sail and prow twisted outwards. Under the prow there was a rostrum made for striking the enemy ships under the sea.
By its original form, the liburnian was similar to the penteconter. It had one bench with 25 oars on each side, while in the late ages of the Roman Republic, it was equipped with two banks of oars (a bireme), faster, lighter, and more agile than triremes. The liburnian design was adopted by the Romans and became a key part of Ancient Rome's navy, most possibly by mediation of Macedonian navy in the 2nd half of the 1st century BC. Liburnians played a key role in the battle of Actium in Greece, which lasted from August 31 to September 2 of 31 BC.
Liburnians were differentfrom the battle triremes, quadriremes and quinqueremes not because of rowing but rather because of its specific constructional features.[1][2] It was 109 ft (33 m) long and 16 ft (5 m) wide with a 3 ft (0.91 m) draft. Two rows of oarsmen pulled 18 oars per side. The ship could make up to 14 knots under sail and more than 7 under oars.[3] Such a vessel, used as a merchantman, might take on a passenger, as Lycinus relates in the second-century dialogue, traditionally attributed to Lucian of Samosata: "I had a speedy vessel readied, the kind of bireme used above all by the Liburnians of the Ionian Gulf."
Once the Romans had adopted the liburnian, they proceeded to make a few adaptations to improve the ships’ use within the navy. The benefits gained from the addition of rams and protection from missiles more than made-up for the slight loss of speed.[4] Besides the construction, the ships required that the regular Roman military unit be simplified in order to function more smoothly. Each ship operated as an individual entity, so the more complicated organization normally used was not necessary.[5] Within the navy, there were probably liburnian of several varying sizes, all put to specific tasks such as scouting and patrolling Roman waters against piracy.[6] The Romans made use of the liburnian particularly within the provinces of the empire, where the ships formed the bulk of the fleets,[7][8][9] while it was included by small numbers in fleets of Ravenna and Micenum, where a large number of the Illyrians were serving, especially Dalmatae, Liburnians and Pannonians.
Gradually liburnians became a general name for the different types of the Roman ships, attached also to the cargo ships in the Late Antique. Tacitus and Suetonius were using it as a synonym for the battle ship. In inscriptions it was mentioned as the last in class of the battle ships: hexeres, penteres, quadrieres, trieres, liburna.[10]